If it could be added internally in a Mac of that vintage, it will have to be in a single-drive Mac - and very likely - another PowerBook. Your PowerBook's 2.5" laptop drive has a 68K (processor-based) Mac OS build, so it can't be installed in a slightly newer Power Mac and boot the computer. Obviously, finding another PowerBook 190 (using the same 68K OS build) would be the easiest solution."Īs I described, you have both hardware and software issues to contend with, when selecting a compatible, replacement (older) Mac computer. Additionally, the hard drive has the 2.5" form factor used in laptops, which has a different connection interface than the 3.5" IDE hard drives used in other desktop Macs of that vintage with comparable specs. I understood your question and your intended goal when I replied: " It appears that you'd like to find a compatible Mac of that vintage, into which you'd install your PowerBook 190's internal hard drive for the purpose of running old programs, accessing their files, etc. My only question/goal was to take the physical drive and move it to another native Mac (circa early 1990s)." " Thanks but this isn't answering my direct question. I bought one like this for $15 and it works on my Macs and PCs. Check out any PC/electronics stores in your area. The adapter that Allan linked would enable you to transfer your files from the drive to a newer Mac via USB, and because it's not platform-specific, you're not limited to buying one from a Mac-centric store. Obviously, finding another PowerBook 190 (using the same 68K OS build) would be the easiest solution, but if you found one, it's anyone's guess as to how much remaining service life it would have at this point. There are adapters to install a 2.5" hard drive in place of a 3.5" drive, but whether this type of generic adapter would fit in the replacement Mac of your choice is questionable. Additionally, the hard drive has the 2.5" form factor used in laptops, which has a different connection interface than the 3.5" IDE hard drives used in other desktop Macs of that vintage with comparable specs (like a Performa 636CD). This limits the potential older models that could use the drive. As Allan pointed out, the internal hard drive is an IDE drive, not SCSI. It appears that you'd like to find a compatible Mac of that vintage, into which you'd install your PowerBook 190's internal hard drive for the purpose of running old programs, accessing their files, etc. I got stuff such as old work and apps where I don't have backup disks (like the original versions of Photoshop and PageMaker, etc.) and I would love to get it on a Mac I can get to. What should I expect when I would go forward with such thing? Is it as simple with New World/Intel types where I could theroetically take the HDD out from like Power Mac G3 to an Intel iMac and expect to run smoothly? Would I get the Sad Mac if this was done? Or would I have to do something more complex? ![]() ![]() It is running System 7.5.5, but I forget what "enablers" are running. ![]() My working knowlege on the vintage Mac has faded as time fades by, and doing quick research I don't know what HDD connection the PB used. The Mac boots up, but the case is essentially totaled and I am planning to find an Mac LC model to add to my Apple collection in the near future, since I kinda don't want a 5300 type (too risky for me if I got one that was in the infamous recall in the mid 90s.) There is no external display adaptor or port and I'd like to move it to another Mac. I have a PowerBook 190(cs) where the display died about a decade ago when the PB was in production use.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |